fnctId=profl,fnctNo=48 인물소개 리스트 이영림 교수 연구실 1공학관712호 전화번호 041-521-9261 전공 열유체공학 이메일 ylee@kongju.ac.kr 상세보기 학력 The University of Texas at Austin, 기계공학 박사 , 1995 서울대학교, 기계공학학 석사, 1988 한양대학교, 기계공학공학 학사, 1986 논문 "레이져화학증착을 이용한 3차원 쾌속조형에 관한 실험적 연구", 대한기계학회 논문집, 2005. 1 "레이져 및 화학증착을 이용한 새로운 3차원 마이크로 쾌속조형 기술 개발", 한국과학재단연구보고서, 2004. 5 "Nd-yag 레이저 화학증착을 이용한 Sic 로드 성장에 관한 실험적 연구", 대한기계학회논문집(A), 2004. 4 "배가스 폐열 회수용 순환유동층열교환기의 오염저감특성", 대한설비공학회 동계학술발표대회 논문집, 2003. 11 "건타입버너의 수소연소에 관한 연구", 대한기계학회논문집(B), 2003. 11 "탄성 스프링 지지를 갖고 이동질량을 받는 보의 동적응답", 대한기계학회 춘계학술대회논문집, 2003. 4 "LCVD를 이용한 SiC 로드 성장에 관한 실험적 연구", 대한기계학회 춘계학술대회 논문집, 2003. 4 "온실가스 저감을 위한 건타입 연소기의 수소 연소 연구", 공주대학교 생산기술연구소 논문집, 2002. 12 "배플판이 없는 순환유동층열교환기의 전열특성 및 압력강하", 대한설비공학회설비공학논문집, 2002. 12 "건타입버너의 수치해석적 연구", 대한설비공학회동계학술발표대회 논문집, 2002. 11 "Si(CH3)4로부터 SiC의 레이저 화학증착에 관한 연구", 대한기계학회논문집(B), 2002. 9 "레이저를 이용한 실리콘 카바이드의 화학증착에 관한 연구", 대한기계학회 춘계학술대회논문집,2002. 5 "Effects of Body Leakage on Ventilation and Wind Noise around a Sunroof",Journal of AutomobileEngineering, 2002. 5 이영림, 이금배 2002.1.15, " 수소연소기 설계 기술개발", 에너지관리공단 연구보고서. 이영림, 2002, " Si(CH3)4로부터 SiC의 레이저 화학증착에 관한 연구", 대한기계학회 논문집, in review. 이영림 2001.12.20 "레이저 및 화학증착을 이용한 마이크로 쾌속조형 원천기술 개발", 한국과학재단 1차년도 보고서 이영림, 이금배, 심규성, 2001, "건타입버너를 이용한 수소보일러 성능 연구", 설비공학회 논문집, in review. 이영림, 2001, "SiC 레이저 화학증착율 예측을 위한 수치해석적 연구", 7개대학 공동논문집, 공업기술연구 Y. L. Lee, 2001, "Effects of Body Leakage on Ventilation and Wind Noise around a Sunroof", Journal of Automobile Engineering (SCI), accepted for publication. 이영림, 이금배, 심규성, 2001, "건타입버너를 이용한 수소보일러 Feasibility 연구", 설비공학회 동계 학술발표회논문집, pp. 698 ~ 703. 이영림, 2001, "3차원 방열기 모델을 이용한 엔진냉각 해석", 한국자동차 공학회 논문집, Vol. 9, No. 4, pp. 10 ~17. 이영림, 2001, "차체 기밀특성이 선루프 성능에 미치는 영향 연구", 한국자동차 공학회 논문집, Vol. 9, No.3, pp.201~209. 이영림, 2000, "차량의 페이스 리프트시 엔진냉각 성능 해석", 공주대학교 생산기술연구소 논문집, Vol 8, pp.32 ~ 37. 이영림, 2000, "승객실 열유동 해석을 통한 쾌적성 및 냉방 성능 예측", 한국자동차 공학회 추계학술대회논문집, 2000-03-2236, pp.764-769. K. Jakubanas, Y. L. Lee, M. Shaarawi, H. L. Marcus, J. M. Sanchez, 1997, "Selective area laser deposition of Titanium Oxide", Rapid Prototyping Journal, vol.3, pp44-52. Y. L. Lee and J. M. Sanchez, 1997, "Theoretical Study of Thermodynamics relevant to Tetramethylsilane Pyrolysis", Journal of Crystal Growth(SCI), vol. 178, pp. 513-517. Y. L. Lee and J. M. Sanchez, 1997,"Simulation of Chemical-Vapor-Deposited SiC from Tetramethylsilanes for a cold wall vertical reactor", Journal of Crystal Growth(SCI), vol. 178, pp. 505-512. K. Jakubanas, Y. L. Lee, M. Shaarawi, H. L. Marcus, J. M. Sanchez, 1997, "Selective Area laser Deposition (SALD) of Titanium Oxide", 6th European Conference on Rapid Prototyping and Manufacturing. 경력 공주대학교 공과대학 기계공학부 자동차공학 전공, 교수 삼성전자, 중앙연구소, E-CIM, 책임연구원 삼성자동차, 중앙연구소, 책임연구원 텍사스 주립대학, Center for Materials Sci. & Eng., 박사후연구원 UT Austin, 기계공학과, Teaching Assistant (Fluids Lab) 한국과학 기술원, 생산기술연구원, 연구원 학술활동 학회활동 한국자동차공학회, 정회원 대한기계학회, 정회원 한국설비공학회, 정회원, 편집위원 연구수행과제 하이브리드 자동차설계연구, 12/2004 - 11/2005, 공주대학교 섬유건조기의 산화제 제어 연소기술개발, 5/2002 - 2/2003, 중소기업청 레이저 및 화학증착을 이용한새로운 3차원 마이크로 쾌속조형원천기술 개발, 4/2004- 3/2003, 한국과학재단 건타입버너를 이용한 수소연소기 성능연구,11/2001 - 10/2002, 공주대학교 레이저 및 화학증착을 이용한 새로운 3차원마이크로 쾌속조형원천기술 개발, 4/2001 - 3/2002, 한국과학재단 전성식 교수 연구실 1공학관711호 전화번호 041-521-9262 전공 기계설계, 충돌해석 이메일 sscheon@kongju.ac.kr 상세보기 학력 한국과학기술원, 기계공학박사, 1999 한국과학기술원, 정밀공학석사, 1995 고려대학교, 기계공학학사, 1993 논문 국외전문학술지 S. A. Meguid, S. S. Cheon, N. El-Abbasi, FE Modelling of Deformation Localization in Metallic Foams,Finite Elements in Analysis and Design,vol.38, pp.631 ~ 643,2002 D.G. Lee, S.S. Cheon,Impact Characteristics of Glass Fiber Composites with respect to Fiber Volume Fraction,Journal of Composite Materials,vol.35,pp.27 ~ 56,2001 D.G. Lee, T.S. Lim, S.S. Cheon, Impact Energy Absorption Characteristics of Composite Structures,Composite Structures,vol.50, pp.381 ~ 390,2000 S.S. Cheon, D.G. Lee, T.S. Lim,Impact Energy Absorption Characteristics of Glass Fiber Hybrid Composites,Composite Structures,vol. 46권, pp.267 ~ 278,1999 S.S. Cheon, D.G. Lee, K.S. Jeong, Composite Side-Door Impact Beams for Passenger Cars,Composite Structures, vol. 38권, pp.229 ~ 239,1997 S.S. Cheon, D.G. Lee, J.H. Choi, Development of the Composite Bumper Beam for Passenger Cars,Composite Structures, vol. 32권, pp.491 ~ 499,1995 국내학술회의 발표논문 전성식, 이대길, 임태성, 유리섬유 혼성 복합재료의 충격 에너지 흡수에 관한 연구,한국복합재료학회 춘계학술대회, pp.9 ~ 14,1999 전성식,이대길,섬유부피분율에 따른 복합재료의 충격에너지 특성,대한기계학회 춘계학술대회, pp.78 ~ 83,1998 전성식, 이대길, 정광섭,자동차 구조용 충격흡수봉의 정 동적 특성에 관한 연구,대한기계학회 춘계학술강연 및 논문 발표회, pp.137 ~ 142,1997. 전성식,이대길,복합재료를 이용한 자동차용 충격흡수봉의 제작,한국복합재료학회 추계학술대회, pp.300 ~ 305,1996 전성식,이대길, 김진수,섬유강화 복합재료를 이용한 자동차용 Impact Beam에 관한 연구,대한기계학회 추계학술대회, pp.764 ~ 768,1995. 전성식, 이대길, 최진호, 황정선,자동차용 복합재료 Bumper Beam에 관한 연구,한국복합재료학회 추계학술대회, pp.198 ~ 203,1994 국외학술회의 발표논문 S.S. Cheon, D.G.Lee,Impact Properties of Glass Fiber Composites with respect to Surface Treatment and Fiber Volume Fraction,International Conference on Composite Materials, 1999 경력 공주대학교 공과대학 기계공학부 자동차공학 전공, 교수 현대기아자동차 선행개발센터 차량개발팀 선임연구원 University of Toronto, 기계산업공학과, 박사후 연구원 (EMD Lab) 한국과학 기술원, 박사후 연구원 학술활동 학회활동 한국복합재료학회, 정회원, 편집위원 대한기계학회, 정회원 한국자동차공학회, 정회원 연구수행과제 알루미늄 발포제의 위성구조 적용에 관한 연구, 2004/2 - 2005/1, 한국과학기술원(KAIST) 알루미늄 발포재의 취성구조 적용에 관한 연구, 2003/9 - 2004/1, 한국기술기획평가원 서현규 교수 연구실 1공학관710호 전화번호 041-521-9264 전공 열공학, 연소, 연소기관 이메일 hksuh@kongju.ac.kr 상세보기 학력 한양대학교 기계공학 박사 (2005.03 ~ 2009.02) 한양대학교 기계공학 석사 (2003.03 ~ 2005.02) 영남대학교 기계공학 학사 (1995.03 ~ 2003.02) 논문 국외 전문학술지 (SCI/SCIe Journal) Young Chan Lim, Jun Woo Jung, Hyun Kyu Suh, Effect of advanced intake valve closing on the thermo-chemical characteristics of the homogeneous combustion in a DME fueled HCCI engine, Fuel (SCI Journal), 273, 2020 Se Hun Min, Hyun Kyu Suh, Junepyo Cha., Effect of Simulated-EGR (N2) on the Distribution characteristics of equivalence ratio and the formation of exhaust emissions in a CI engine under early injection conditions, Energy (SCI Journal), 193, 116850, 1-12, 2020 Young Chan Lim, Hyun Kyu Suh, Prediction of homogeneous combustion by modification of the fuel combustion mechanism in a DME fueled CI engine, Journal of Mechanical Science and Technology (SCI e Journal), 33, 6075-6084, 2019 Se Hun Min, Hyun Kyu Suh, Effect of Water Vapor Injection on the Distributions of Equivalence Ratio and the NO Emission Reduction in a CI Engine, Energies (SCI Journal), 12, 22, 1-15, 2019 Se Hun Min, Hyun Kyu Suh, Seongin Jo , Suhan Park., Effect of Cryogenic Intake Air Temperature on the In-cylinder Temperature and Formation of Exhaust Emissions in a CI Engine, Journal of Engineering for Gas Turbines and Power (SCI Journal), 141, 091022, 1-8, 2019 Hyun Kyu Suh, Analysis of thermal performance of an outer-rotor Surface-mounted permanent magnet (SPM) motor for electric vehicles, Journal of Mechanical Science and Technology (SCIe Journal), 30, 12, 5699-5706, 2016 Hyun Kyu Suh, Chang Sik Lee, A review on atomization and exhaust emissions of a biodiesel-fueled compression ignition engine, Renewable and Sustainable Energy Reviews (SCI Journal), 58, 1601-1620, 2016 Hyun Kyu Suh, Experiments and theoretical approaches on the burning behaviors of single n-heptane droplet, Journal of Mechanical Science and Technology (SCIe Journal), 29, 5, 2249-2257, 2015 Hyun Kyu Suh, Development of Wobble-Plate-Type Fuel Pump in Compression Ignition Engine Fueled With Dimethyl Ether, Journal of Energy Resources Technology (SCI Journal), 137, 3, 032208, 2014 Daniel L. Dietrich, Vedha Nayagam, Michael C. Hicks, Paul V. Ferkul, Frederick L. Dryer, Tanvir Farouk, Benjamin D. Shaw, Hyun Kyu Suh, Mun Y. Choi, Yu Cheng Liu, C. Thomas Avedisian, Forman A. Williams, Droplet Combustion Experiments Aboard the International Space Station, Microgravity Science and Technology (SCIe Journal), 26, 2, 65-76, 2014 Hyun Kyu Suh, Study on the twin-pilot-injection strategies for the reduction in the exhaust emissions in a low-compression-ratio engine, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (SCI Journal), 228, 3, 2041-2991, 2014 Hyun Kyu Suh, and Chang Sik Lee, Impact of Orifice Angle Configurations on the Droplet Atomization Enhancement of Diesel Fuel in a Group-Hole Nozzle, Engineering for gas turbine and power (SCI Journal), 133, 112802, 2011 Hyun Kyu Suh, Investigations of Multiple Injection Strategies for the Improvement of Combustion and Exhaust Emissions Characteristics in a Low Compression Ratio (CR) Engine, Applied Energy(SCI Journal), 88, 112, 5013-5019, 2011 Seung Hyun Yoon, Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, Effect of Biodiesel-Ethanol Blended Fuel Spray Characteristics on the Reduction of Exhaust Emissions in a Common-Rail Diesel Engine, Journal of Energy Resources Technology (SCI Journal), 132, 42201, 2010 Hyun Kyu Suh, Seung Hyun Yoon, and Chang Sik Lee, Effect of Multiple Injection Strategies on the Spray Atomization and Reduction of Exhaust Emissions in a Compression Ignition Engine Fueled with Dimethyl Ether (DME), Energy &Fuels (SCI Journal), 24, 2, 1323-1332, 2010 Su Han Park, Hyun Kyu Suh and Chang Sik Lee, Nozzle Flow and Atomization Characteristics of Ethanol Blended Biodiesel Fuel, Renewable Energy (SCIe Journal), 35, 1, 144-150, 2010 Su Han Park, Hyung Jun Kim, Hyun Kyu Suh, and Chang Sik Lee, Atomization and Spray Characteristics of Bioethanol and Bioethanol Blended Gasoline Fuel Injected through a Direct Injection Gasoline Injector, International Journal of Heat and Fluid Flow (SCI Journal), 30, 6, 118-1192, 2009 Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, Effect of Bioethanol-Biodiesel Blending Ratio on Fuel Spray Behavior and Atomization Characteristics, Energy & Fuels, (SCI Journal), 23, 8, 4092-4098, 2009 Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, Effect of Group-Hole Nozzle Geometry on the Improvement of Biodiesel Fuel Atomization Characteristics, Journal of Automotive Engineering, Part D, (SCI Journal), 223, 12, 1587-1600, 2009 Hyung Jun Kim, Hyun Kyu Suh and Chang Sik Lee, A Study on an Application of Hybrid Breakup Model for the DME Atomization in a Common-Rail Injection System, Journal of Automotive Engineering, Part D, (SCI Journal), 223, 10, 1351-1359 2009, SCI Su Han Park, Hyung Jun Kim, Hyun Kyu Suh and Chang Sik Lee, Experimental and Numerical Analysis of Spray-Atomization Characteristics of Biodiesel Fuel in Various Fuel and Ambient Temperature Conditions, International Journal of Heat and Fluid Flow (SCI Journal), 30, 5, 960-970, 2009 Seung Hyun Yoon, Hyun Kyu Suh, and Chang Sik Lee, Effect of Spray and EGR Rate on the Combustion and Emission Characteristics of Biodiesel Fuel in a Compression Ignition Engine, Energy &Fuels (SCI Journal), 23, 3, 1486-1493, 2009 Hyung Jun Kim, Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, Atomization and Evaporation Characteristics of the Biodiesel and Dimethyl Ether as an Alternative Fuel Injected through a High Pressure Injection System, Energy & Fuels (SCI Journal), 23, 3, 1734-1742, 2009 Su Han Park, Hyun Jun Kim, Hyun Kyu Suh, and Chang Sik Lee, A Study on the Fuel Injection and Atomization Characteristics of Soybean Oil Methyl Ester(SME), International Journal of Heat and Fluid Flow (SCI Journal), 30, 108-116, 2009 Hyun Kyu Suh, Su Han Park, Hyun Jun Kim, and Chang Sik Lee, Influence of Ambient Flow Conditions on the Droplet Atomization Characteristics of Dimethyl Ether(DME), Fuel (SCI Journal), 88, 1070-1077, 2009 Sung Wook Park, Hyun Kyu Suh, Chang Sik Lee, and Rolf D. Reitz, Modeling of Group-Hole Nozzle Sprays using Grid-Size and Hole-Location Independent Models, Atomization and Sprays (SCI Journal), 19, 6, 567-582, 2009 Su Han Park, Seung Hyun Yoon, Hyun Kyu Suh, and Chang Sik Lee, Effect of the Temperature Variation on Properties of Biodiesel and Biodiesel-Ethanol Blends Fuels, Oil & Gas Science and Technology (SCI Journal), 63, 6, 737-745, 2008 Hyung Jun Kim, Hyun Kyu Suh, and Chang Sik Lee, Numerical and Experimental Study on the Comparison Between Diesel and Dimethyl Ether(DME) Spray Behavior According to Combustion Chamber Shape, Energy & Fuel (SCI Journal), 22, 4, 2851-2860, 2008 Hyung Jun Kim, Hyun Kyu Suh, Su Han Park, and Chang Sik Lee, An Experimental and Numerical Investigation of Atomization Characteristics of Biodiesel, Dimethyl Ether and Biodiesel-Ethanol Blended Fuel, Energy & Fuel (SCI Journal), 22, 3, 2091-2098, 2008 Hyun Kyu Suh, and Chang Sik Lee, Effect of Cavitation in Nozzle Orifice on the Diesel Fuel Atomization Characteristics, International Journal of Heat and Fluid Flow (SCI Journal), 29, 4, 1001-1009, 2008 Hyun Kyu Suh, Hyun Gu Roh, and Chang Sik Lee, Spray and Combustion Characteristics of Biodiesel Fuel in a Direct Injection Common-Rail Diesel Engine, Engineering for gas turbine and power (SCI Journal), 130, 32807, 2008 Hyun Kyu Suh, Su Han Park, and Chang Sik Lee, Experimental Investigation of Nozzle Cavitating Flow Characteristics for Diesel and Biodiesel Fuels, International Journal of Automotive Technology (SCIe Journal), 9, 2, 217-224, 2008 Hyun Kyu Suh, and Chang Sik Lee, Experimental and Numerical Analysis of Diesel Fuel Atomization Characteristics of a Piezo Injection System, Oil & Gas Science and Technology (SCI Journal), 63, 2, 239-250, 2008 Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, Effect of Cavitating Flow on the Flow and Fuel Atomization Characteristics of Biodiesel and Diesel Fuels, Energy & Fuel (SCI Journal), 22, 1, 605-613, 2008 Hyun Kyu Suh, and Chang Sik Lee, Experimental and Analytical Study on the Spray Characteristics of Dimethyl Ether(DME) and Diesel Fuels within a Common-Rail Injection System in a Diesel Engine, Fuel (SCI Journal), 87, 6, 925-932, 2008 Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, Effect of Piezo-Driven Injection System on the Macroscopic and Microscopic Atomization Characteristics of Diesel Fuel Spray, Fuel (SCI Journal), 86, 17-18, 2833-2845, 2007 Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, A Study of the Flow and Atomization Characteristics of Impinged Diesel Spray on a Chamber Wall, Atomization and Sprays (SCI Journal), 17, 569-599, 2007 Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, Atomization Characteristics of Dimethyl Ether Fuel as an Alternative Fuel Injected through a Common-Rail Injection System, Energy & Fuels (SCI Journal), 20, 4, 1471-1481, 2006 Sung Wook Park, Hyun Kyu Suh, and Chang Sik Lee, Effect of a Split Injection on Spray Characteristics for a Common-Rail Type Diesel Injection System, International Journal of Automotive Technology (SCIe Journal) 6, 4, 315-322, 2005 국내 전문학술지(한국연구재단 등재지/등재후보지) Se Hun Min, Hyun Kyu Suh, Effect of Diameter Increase on Stress Distribution of Lightweight Aluminum IMS for xEV, Journal of KSMT, Vol. 22, No. 1, pp. 159-165, 2020 Jin Choi, Hyun Kyu Suh, Effect of Cylinder Geometries on the Soot Reduction in a Compression Ignition Engine with Swirl Nozzle Injector, Transactions of KSME, Vol. 44, No. 2, pp. 143-150, 2020 Young Chan Lim, Jun Woo Jung, Hyun Kyu Suh, A Prediction on the Flammability Limits of Biodiesel Fuel in the High Temperature and Pressure Conditions, Journal of ILASS-Korea, Vol. 24, No. 4, pp. 157-162, 2019 Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Effect of Diameter of Shaft Part on the Load Distribution Characteristics in Tubular & Solid Shaft Yoke for Al-IMS, Journal of KSMT, Vol. 21, No. 4, pp. 709-714, 2019 Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, The Effect of Target Species Changing on the Mechanism Reduction in DRGEP Method, Journal of The Korean Society of Combustion, Vol. 24, No. 3, pp. 1-8, 2019 Se Hun Min, Junpyo Cha, Hyun Kyu Suh, The Effect of Simulated-EGR(N2 + CO2) Composition on the Distributions of Fuel Mass Fraction and Formation/Oxidation of Exhaust Emissions in a CI Engine, Transactions of KSME, Vol. 43, No. 12, pp. 839-846, 2019 Jin Choi, Hyun Kyu Suh, Effect of Swirl Flow in a Cylinder induced by the Swirl Nozzle Injector on the Performance of CI Engine, Transactions of KSME, Vol. 43, No. 9, pp. 621-629, 2019 Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, Biodiesel-Combustion Analysis through a Study on the Reduction of the Chemical-Reaction Mechanism, Transactions of KSME, Vol. 43, No. 6, pp. 423-431, 2019 Jin Choi, Hyun Kyu Suh, Spray Atomization and In-Cylinder Mixture Characteristic of the Swirl Nozzle, Transactions of KSME, Vol. 43, No. 6, pp. 407-414, 2019 Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Stress Distribution Characteristics of Al-IMS for Passenger Vehicle, Journal of KSMT, Vol. 21, No. 3, pp. 517-522, 2019 Seok Hoon Jeong, Hyun Kyu Suh, “Effect of Vortex Generator in Intake Pipe on the Moisture Concentration Distributions and Combustion Performance in a CI Engine,” Journal of ILASS-Korea, Vol. 23, No. 4, pp. 169-174, 2018 Se Hun Min, Jin Seup Yeom, Hyun Kyu Suh, A Study on the Indentation Process Improvement of Tubular Shaft Yoke and Splined Shaft in IMS Module, Journal of KSMT, Vol. 20, No. 1, pp. 127-133, 2018 Jin Seup Yeom, Hyun Kyu Suh, The Effect of Shaft Hole Length on the A-IMS Tubular Shaft Machining, Journal of KSMT, Vol. 20, No. 1, pp. 96-101, 2018 Se Hun Min, Hyun Kyu Suh, Improvement of Tubular Shaft Yoke Spline Machining in Both Side IMS Module, Journal of KSMT, Vol. 20, No. 6, pp. 924-928, 2018 Young Chan Lim, Hyun Kyu Suh, Seung Hyun Yoon, “Prediction of Biodiesel Homogeneous Combustion and Flammability Limits in Compression Ignition Condition,” Trans. Korean Soc. Mech. Eng. B, Vol. 42, No. 11, pp. 711-719, 2018 Seok Hoon Jeong, Hyun Kyu Suh, “Influence of Fin Characteristics on the Turbulent Flow in IHX for a Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 20, No. 4, pp. 413-419, 2018 Young Chan Lim, Jun Woo Chung, Hyun Kyu Suh, “A Study on the NOX Formation Characteristics and Detailed Chemical Reaction Pathways of Biodiesel in the Various Ambient Conditions” Journal of Korean Soc. Combustion, Vol. 23, No. 2, pp. 27-34, 2018 Se Hun Min, Hyun Kyu Suh, “Prediction of Diesel Fuel Spray Characteristics in Compression Ignition Engine Cylinder by Intake Humidification,” Journal of ILASS-Korea, Vol. 23, No. 1, pp. 30-35, 2018 Se Hun Min, Hyun Kyu Suh, “The Numerical Study on Prediction of Diesel Fuel Spray Evolution in a Different Types of Nozzle Geometry,” Journal of ILASS-Korea, Vol. 22, No. 4, pp. 169-174, 2017 Seok Hoon Jeong, Hyun Kyu Suh, “The Effect of K-ε Turbulence Model on the Performance Analysis of Battery Cooling Systems,” Journal of Korean Soc. of Mechanical Technology, Vol. 19, No. 4, pp. 513-517, 2017 Se Hun Min, Hyun Kyu Suh, The Effect of Sliding Cage Geometry on the A-IMS Module for Commercial Vehicle, Journal of KSMT, Vol. 19, No. 1, 2017 Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, An Improvement of Production Straightness of A-IMS Tubular Shaft on According to the Number of Die Bearing, Journal of KSMT, Vol. 19, No. 3, pp. 396-401, 2017 Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, A Study on Improvement of Spline Processing in A-IMS Tubular Shaft, Journal of KSMT, Vol. 19, No. 3, pp. 421-426, 2017 Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Characteristics of Alkane-based Single Fuel Droplet,” Journal of ILASS-Korea, Vol. 22, No. 2, pp. 80-86, 2017 Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Behavior of Octane Single Fuel Droplet Under the Constant Volume Combustion Conditions,” Trans. Korean Soc. Mech. Eng. B, Vol. 41, No. 6, pp. 389-395, 2017 Se Hun Min, Kyung Bum Park, Hyun Kyu Suh,. Optimal design of commercial A-IMS core components using multi-stage cold forging method, Journal of KSMT, Vol. 18, No. 2, pp. 268-274, 2016 Se Hun Min, Hyun Kyu Suh, Optimal Design of the A-IMS Core Components for Commercial Vehicle by the Effect of Upper Die Type, Journal of KSMT, Vol. 18, No. 2, pp. 294-300, 2016 Se Hun Min, Hyun Kyu Suh, The Effect of Torque Variation on the Stress Distributions Characteristics in A-IMS for Passenger Vehicle, Journal of KSMT, Vol 18, No. 6, pp. 949-954, 2016 Seok Hoon Jeong, Hyun Kyu Suh, “Predictions of the Cooling Performance on an Air-Cooled EV Battery System According to the Air Flow Passage Shape,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 12, pp. 801-807, 2016 Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Fuel Spray Targeting for the Improvement of HSDI Engine Performance,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 9, pp. 596-576, 2016 Young Chan Lim, Hyun Kyu Suh, “Effect of High Temperature and Pressure Conditions on the Combustion Characteristics of n-butanol and n-heptane Fuel,” Journal of ILASS-Korea, Vol. 21, No. 1, pp. 29-36, 2016 Young Chan Lim, Hyun Kyu Suh, “Prediction of Biodiesel Combustion, CO and NOX Emission Characteristics in Accordance with Equivalence Ratio” Journal of Korean Soc. Combustion, Vol. 21, No. 1, pp. 1-7, 2016 Min S. H. and Suh H. K., Design optimization of the asymmetry pinch yoke according to the slit length, Journal of KSMT, Vol. 18, No. 1, pp. 102-108, 2016 Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Effect of Nozzle Geometry on the Small CRDI Engine Performance,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 254-260, 2015 Young Chan Lim, Hyun Kyu Suh, “Effect of Initial Diameter on the Soot Generation of Toluene Fuel Droplet,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 261-267, 2015 Young Chan Lim, Hyun Kyu Suh, “Effect of mixing ratio of n-heptane fuel on the combustion characteristics of n-butanol fuel” Journal of Korean Soc. Combustion, Vol. 20, No. 3, pp. 1-6, 2015 Se Hun Min, Hyun Kyu Suh, “Effect of operating conditions on the combustion and emission characteristics in small HSDI CI engine,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 699-705, 2015 Young Chan Lim, Hyun Kyu Suh, “Effect of Ambient Conditions on the Soot Generation of Decane Fuel Droplet,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 1-5, 2014 Hyun Kyu Suh, “Effect of Intake Air Temperature on the Performance and Emissions Characteristics of SI Engine,” Journal of Korean Soc. of Mechanical Technology, Vol. 16, No. 4, pp. 1679-1684, 2014 Hyun Kyu Suh, “Study on the Combustion Characteristics of Methanol Fuel Droplet,” Journal of ILASS-Korea, Vol. 19, No. 3, pp. 109-114, 2014 Hyun Kyu Suh, "A Review on the Mixture Formation and Atomization Characteristics of Oxygenated Biodiesel Fuel," Journal of KSAE, Vol. 22, No. 1, pp. 183-192, 2014 Hyun Kyu Suh, “Effect of Blending Ratio on the Injection Rate Characteristics of Biodiesel Fuel in a CI Engine,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 6, pp. 841-846, 2013 Hyun Kyu Suh, “Numerical Analysis of Internal Flow and Temperature Distributions of Battery for the Electric Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 6, pp. 813-818, 2013 Hyun Kyu Suh, “Effect of Inlet Geometry on the Cooling Performance of Battery Pack for an Electric Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 5, pp. 679-684, 2013 Hyun Kyu Suh, “Effect of Ultrasonic Frequency on the Atomization Characteristics of Single Water Droplet in an Acoustic Levitation Field,” Journal of ILASS-Korea, Vol. 18, No. 3, pp. 1-6, 2013 Yunsub Sin, Geesoo Lee, Hyunchul Kim, Soo-Jin Jeong, Hyun Kyu Suh, "Effect of Flow Control Valve Type on the Performance of DME High Pressure Fuel Pump," Journal of KSAE, Vol. 21, No. 5 pp. 67-73, 2013 Yunsub Sin, Geesoo Lee, Hyunchul Kim, Sangshin Kwak, Suk Shin Shin, Hyun Kyu Suh, " A Study on the Injection Characteristics of Swirl Nozzle Injector in Common-rail System for High Pressure Fuel Injection," Journal of KSAE, Vol. 21, No. 4, pp. 89-95, 2013 Hyun Kyu Suh, “Influence of Initial Diameter on the Combustion Characteristics of n-heptane Droplet,” Journal of ILASS-Korea, Vol. 18, No. 2, pp. 94-99, 2013 Chunghui Kim, Hyunchul Kim, Geesoo Lee, Jeonghwang Cho, Munsoo Chon, Suk Shin Shin, Hyun Kyu Suh, " PM Reduction Characteristics of Partial Metal DPF with Screen Mesh Filter Structure," Journal of KSAE, Vol. 21, No. 3, pp. 82-87, 2013 Hyun Kyu Suh, Jee Won Kim, and Chang Sik Lee, “Effect of Injection Condition on the Diesel Fuel Atomization in a Multi-hole Nozzle,” Journal of ILASS-Korea, Vol. 14, No. 1, pp. 8-14, 2009 Su Han Park, Hyun Kyu Suh, Hyung Jun Kim, and Chang Sik Lee, “Spray Characteristics of Biodiesel Fuel by Blending Other Fuels in a Common Rail Injection System,” Journal of KSAE, Vol. 17, No. 2, pp. 82-89, 2009 Su Han Park, Hyung Jun Kim, Hyun Kyu Suh, Mun Soo Chon, and Chang Sik Lee, “Effect of Ambient Conditions in the Chamber on the Spray Behavior and Atomization Characteristics of Biodiesel-Ethanol Blended Fuels,” Journal of ILASS-Korea, Vol. 13, No. 4, pp. 180-186, 2008 Hyung Jun Kim, Hyun Kyu Suh, and Chang Sik Lee, “Spray and Evaporation Characteristics of DME Fuel at the High Pressure and Temperature,” Journal of ILASS-Korea, Vol. 12, No. 2, pp. 101-107, 2007 Hyun Kyu Suh, Su Han Park, and Chang Sik Lee, “Effect of Injector Energizing Duration on the Atomization Characteristics of Biodiesel Fuel,” Journal of ILASS-Korea, Vol. 12, No. 2, pp. 108-114, 2007 Young Taek Seo, Hyun Kyu Suh, and Chang Sik Lee, “A Study on the Injection Characteristics of Biodiesel Fuels Injected through Common-rail Injection System,” Journal of KSAE, Vol. 15, No. 5, pp. 97-104, 2007 Hyun Kyu Suh, Ji Hong Park, and Chang Sik Lee, “Macroscopic Behavior and Atomization Characteristics of Dimethyl Ether,” Journal of KSAE, Vol. 15, No. 5, pp. 30-37, 2007 Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, “Effects of Nozzle Orifice Shape and Nozzle Length-Diameter Ratio on Internal and External Flow Characteristics of Diesel and Biodiesel Fuel,” Journal of KSME, Vol. 31, No. 3, pp. 264-272, 2007 Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, “Effects of Nozzle Length-Diameter Ratio on Internal and External Flow Characteristics of Biodiesel Fuel,” Journal of KSAE, Vol. 15, No. 4, pp. 94-100, 2007 Mun Soo Chon, Yong Ha Hwang, Hyun Kyu Suh, and Chang Sik Lee, “Atomization and Evaporation Characteristics of DME Fuel for the Application of HCCI Diesel Engine,” Journal of ILASS-Korea, Vol. 11, No. 3, pp. 140-146, 2006 Ji Hong Park, Hyun Kyu Suh, Sung Wook Park, Jae Wook Kim, and Chang Sik Lee, “Effect of Injector-Driven Type on Spray Behavior and Fuel Atomization Characteristics,” Journal of KSAE, Vol. 14, No. 1, pp. 17-24, 2005 Mun Soo Chon, Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, “Internal Structure and Velocity Field of the Impinging Diesel Spray on the Wall,” Journal of ILASS-Korea, Vol. 10, No. 3, pp. 1-8, 2005 경력 University of Connecticut, Department of Mechanical Engineering, visiting Professor (2019.09 ~ 2020.10) 자동차부품연구원 선임연구원 (2011.10 ~ 2012.08) University of Connecticut, Department of Mechanical Engineering, Post-Doctoral Fellow (2009.10 ~ 2011.09) 한양대학교 산업과학 연구소 선임연구원 (2009.03 ~ 2009.09) 학술활동 학회활동 NASA Paid consultant Planning Committee, Chungnam Technopark, Policy Planning Group Editor of KOSCO(The Korean Society of Combustion) Editor of ILASS-Korea (Institute of Liquid Atomization and Spray System-Korea) Editor of KSMT(The Korean Society of Mechanical Technology) Members of AIAA (American Institute of Aeronautics and Astronautics) Members of ESS (Eastern State Section - the Combustion Institute) Members of ASME (American Society of Mechanical Engineers) Members of KSME (Korea Society of Mechanical Engineers) Members of KSAE (Korea Society of Automotive Engineers) Members of ILASS-Asia (Institute of Liquid Atomization and Spray System-Asia) Members of ILASS-Japan (Institute of Liquid Atomization and Spray System-Japan) 수상경력 2018 Marquis Who's Who in the World An Excellent Paper Award in 2018 (2018 Annual Meeting of the Korean Society of Mechanical Technology) An Excellent Paper Award in 2015 (2015 Spring Conference of the Korean Society of Automotive Engineering) The Most Excellence Ph. D. Thesis Award in 2008 (Hanyang University) An Excellence Article Award in 2007 (Department of Mechanical Engineering, Hanyang University) An Excellence Article Award in 2006 (Department of Mechanical Engineering, Hanyang University) 연구수행과제 Current Projects 과제명 : Soot/NOx model coupling 축소화 연소 메커니즘 개발 및 유효성 평가를 통한 1차/2차 생성 미세먼지 발생 제어 연구사업명 : 중견연구자지원사업 / 지원기관 : 한국연구재단 / 과제기간 : 2020-03-01~2023-02-28 과제명 : 연구기관활성화지원사업 (친환경지속가능에너지연구소)사업명 : 연구기관활성화지원사업 / 지원기관 : 공주대학교 / 과제기간 : 2020-04-01~2021-02-28 과제명 : 6000계 Al 적용 35% 경량 xEV용 일체형 IMS 어셈블리 개발사업명 : 중소기업기술혁신개발사업 / 지원기관 : 중소기업기술정보진흥원 / 과제기간 : 2018-09-01~2020-08-31 과제명 : 바이오디젤 연료의 저온 연소 해석 메커니즘 개발을 통한 가연한계 규명 및 압축착화엔진의 저온 연소 적용 방안 연구사업명 : 일반연구자지원사업(지역대학우수과학자) / 지원기관 : 한국연구재단 / 과제기간 : 2017-03-01~2020-05-31 Past Projects 과제명 : Multi-Layer Graphene Coating 방열소재 특성 연구사업명 : 연구용역 / 지원기관 : 주식회사 경진 / 과제기간 : 2018-12-01~2019-02-28 과제명 : CAE를 이용한 AI Asymmetry Pinch Bolt Yoke 설계 최적화 연구사업명 : 연구용역 / 지원기관 : 드림텍(주) / 과제기간 : 2018-12-01~2019-11-30 과제명 : (대학회계_PoINT사업)2018 대학연구역량 강화 사업(기계자동차공학부 서현규)사업명 : 국립대학혁신지원사업 / 지원기관 : 공주대학교 / 과제기간 : 2018-11-01~2019-02-28 과제명 : 2018 연구력 증진 사업(기계자동차공학부(주) 서현규)사업명 : 연구력증진사업 / 지원기관 : 공주대학교산학협력단 / 과제기간 : 2018-07-01~2019-05-31 과제명 : (대) 차량용 이중관 열교환기의 성능 향상 연구 사업명 : 학술연구(SCI급) / 지원기관 : 공주대학교 / 과제기간 : 2018-03-01~2019-02-28 과제명 : (v) 차량 에어컨용 열교환기 성능해석 및 최적화 연구 사업명 : 학술연구용역 / 지원기관 : (주)휘일 / 과제기간 : 2017-11-03~2018-01-10 · 과제명 : 양형 Tubular Shaft Yoke 적용 IMS 모듈 공용화 기술 개발 사업명 : 지역주력산업육성(R&D)기술개발사업 / 지원기관 : 한국산업기술진흥원 / 과제기간 : 2017-06-01~2018-12-31 과제명 : 2016년 연구기관 마일리지(친환경지속가능에너지연구소) 사업명 : 연구기관마일리지 / 지원기관 : 공주대학교산학협력단 / 과제기간 : 2016-05-01~2017-02-28 과제명 : (대) GDI 인젝터 상세 연구를 통한 엔진 연소 해석의 신뢰성 향상 연구 사업명 : 일반학술연구비(SCI/SCI-E) / 지원기관 : 공주대학교 / 과제기간 : 2016-05-01~2017-02-28 과제명 : (v) 연비 개선을 위한 경량 승용/상용차량 조향 모듈 설계 최적화 사업명 : 연구용역 / 지원기관 : 드림텍(주) / 과제기간 : 2015-08-01~2017-07-31 과제명 : 냉간 압출 다단 단조 기술을 이용한 비대칭 정밀 조향 스티어링 요크 부품 및 모듈 기술 개발[(주)드림텍] 사업명 : 산업협력권사업 / 지원기관 : 한국산업기술진흥원 / 과제기간 : 2014-05-01~2017-04-30 과제명 : 바이오디젤 연료의 Soot 발생 특성 규명 및 오차율 3% 이내의 Soot 해석 모델 개발을 통한 청정 연소 기관의 최적화 연구 사업명 : 일반연구자지원사업(신진연구) / 지원기관 : 한국연구재단 / 과제기간 : 2014-05-01~2017-04-30 과제명 : 전기자동차용 구동 모터 설계를 통한 동력시스템의 최적화 연구 사업명 : 특성화분야 / 지원기관 : 공주대학교 / 과제기간 : 2013-12-01~2014-11-30 과제명 : 전기자동차용 배터리 열관리 시스템 최적화연구 사업명 : 신임교수정착연구비 / 지원기관 : 공주대학교 / 과제기간 : 2012-11-01~2013-10-31 과제명 : 클린 신연료 DME 연료시스템 및 연소기술 개발 사업명 : 산업원천기술개발사업 / 지원기관 : 지식경제부 / 과제기간 : 2011.10 ~ 2012.05 과제명 : 저공해/고효율을 위한 미립화 연료분사장치 개발 사업명 : 중소기업 기술혁신개발 사업 / 지원기관 : 중소기업청 / 과제기간 : 2011.10 ~ 2012.05 과제명 : 고출력 클린 디젤 엔진용 복합 Re-melting 강화기술을 적용한 피스톤 개발 사업명 : 지역 첨단부품소재 육성사업 / 지원기관 : 지식경제부 / 과제기간 : 2011.10 ~ 2012.08 과제명 : 클린 디젤 엔진용 초고압 피스톤 솔트코아 및 인서트링 공정기술개발 사업명 : 제조현장 녹색화 기술 개발 사업 / 지원기관 : 중소기업청 / 과제기간 : 2011.10 ~ 2012.08 과제명 : 클린 디젤 자동차용 고온 플라스틱 경량 배관 라인 개발 사업명 : 다자간 기술개발사업 / 지원기관 : 지식경제부 / 과제기간 : 2011.10 ~ 2012.08 과제명 : Flame Extinguishment (FLEX) Droplet Combustion Experiments in Microgravity 사업명 : NASA FLEX Project / 지원기관 : NASA (National Aeronautics and Space Administration), USA / 과제기간 : 2009-10-01~2015-02-28 과제명 : Optimization of Environmentally Low-Emission Alternative Fuel Engine Technology for the Reduction of Soot and NOX Emission 사업명 : 학문후속세대양성사업(박사후국외연수) / 지원기관 : 한국연구재단 / 과제기간 : 2009-10.01~2010-08-30 과제명 : Development of Injection and Combustion Technologies for Diesel Engines Fuels with Oxygenated Fuels (Development of engine basic technologies for the EURO-5/SULEV standard) 사업명 : ECO-STAR Project / 지원기관 : CEFV (Center for Environmental Friendly Vehicle), Ministry of Environment, KOREA / 과제기간 : 2004-12-01~2011-05-31 과제명 : Technology Development of DME Engine System 사업명 : Lab of Excellency Project / 지원기관 : Ministry of Education and Human Resource Development, Ministry of Commerce, Industry and Energy, Ministry of Labor, KOREA / 과제기간 : 2005-09-01~2008-08-31 과제명 : Measurement of Spray Visualization in GDI Engine 사업명 : Industry-University Cooperation / 지원기관 : NGV (Next Generation Vehicle Technology Co.), Hyundai Motor Company, KOREA / 과제기간 : 2008-06-01~2008-11-31 이세진 교수 연구실 1공학관709호 전화번호 041-521-9259 전공 로봇공학, 인공지능, 자율주행 이메일 sejiny3@kongju.ac.kr 상세보기 홈페이지 바로가기 학력 포항공과대학교 기계공학 박사 (2005.03 ~ 2009.08) 포항공과대학교 기계공학 석사 (2003.03 ~ 2005.02) 한양대학교 기계공학 학사 (1996.03 ~ 2003.02) 논문 Eon-ho Lee, Hyeon Jun Jeon, Jinwoo Choi, Hyun-Taek Choi and Sejin Lee, “Development of vehicle-recognition method on water surfaces using LiDAR data: SPD2 (spherically stratified point projection with diameter and distance),” Defence Technology, 2023. Eon-ho Lee, Byungjae Park, Myung-Hwan Jeon, Hyesu Jang, Ayoung Kim, Sejin Lee, “Data augmentation using image translation for underwater sonar image segmentation,” PLoS ONE, 2022. Huu Thu Nguyen, “딥러닝 기반의 도심 물체 분류를 위한 공간적 라이다 데이터 특징 표현기의 개발,” 한국기계기술학회지, 2022. 이영준, 임유진, 여태경, 이세진, 정종대, 박대길, 한종부, “다중빔음향측심기 계측모델을 활용한 실시간 해저지형도 작성 모의시험,” 제어로봇시스템학회 논문지, 2022. Chul Hee Bae, Yu-Cheol Lee, Wonpil Yu and Sejin Lee, “Spherically Stratified Point Projection: Feature Image Generation for Object Classification Using 3D LiDAR Data,” Sensors MDPI, Vol. 21(23), No. 7860, 2021. 최성모, 이세진, “근골격해부학에 근거한 텐던 매커니즘 기반 다자유도 인간형 로봇 핸드의 기구학적 설계,” 대한기계학회 논문집 A, 45(9), 727-740, 2021. 백선웅, 이세진, “수중 장애물 탐지를 위한 가버필터 기반의 소나 이미지 이진지도 작성법 개발,” 한국기계기술학회지, 2020. Huu-Thu Nguyen, Chul Hee Bae, Eon-Ho Lee, and Sejin Lee, “Multiple Object Detection Based on Clustering and Deep Learning Methods,” Sensors MDPI, Aug 2020. 이언호, 이영준, 최진우, 이세진, “실시간 순환 신경망 기반의 멀티빔 소나 이미지를 이용한 수중 물체의 추적에 관한 연구,” 한국로봇학회 논문지, 15(1), 8-15, 2020. Huu-Thu Nguyen, Eon-Ho Lee, and Sejin Lee, "Study on the Classification Performance of Underwater Sonar Image Classification Based on Convolutional Neural Networks for Detecting a Submerged Human Body," Sensors MDPI, Vol. 20(1), No. 94, Dec 2019. Eon-Ho Lee, Yeoungjun Lee, Jinwoo Choi, and Sejin Lee, "Study of Marker Detection Performance on Deep Learning via Distortion and Rotation Augmentation of Training Data on Underwater Sonar Image," Journal of Korea Robotics Society, Vol. 14, No. 1, pp. 14-21, Mar 2019. Chul Hee Bae and Sejin Lee, "A Study of 3D Point Cloud Classification of Urban Structures Based on Spherical Signature Descriptor Using LiDAR Sensor Data," Transactions of the Korean Society of Mechanical Engineers A, Vol. 43, No. 2, pp. 85-91, Feb 2019. Byungjae Park and Sejin Lee, "Robust Range-Only Beacon Mapping in Multipath Environments," ETRI Journal, Vol. 42, No. 1, Sept 2019. Sejin Lee, Byungjae Park, and Ayoung Kim, "Deep Learning from Shallow Dives: Sonar Image Generation and Training for Underwater Object Detection," arXiv:1810.07990, Oct. 2018. Sejin Lee, "Auto-detection of Submerged Body," Journal of the KSME, Vol. 58, No. 4, pp. 52-56, Apr 2018. Byungjae Park, Beom-Su Seo, and Sejin Lee, "LiDAR Image Segmentation using Convolutional Neural Network Model with Refinement Modules," Journal of Korea Robotics Society, Vol. 13, No. 1, pp. 8-15, Feb 2018. Eon-Ho Lee and Sejin Lee, "Development of Modified Spherical Signature Descriptor Using 3D Point Cloud Data and Application to Convolutional Neural Network for Urban Structure Classification," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 1, pp. 18-25, Feb 2018. Sejin Lee, Kyoungmin Lee, and Jae-Bok Song, "Development of Sonar Morphology-based Posterior Approach Model for Occupancy Grid Mapping," Robotica, Vol. 35, pp. 73-84, Jan 2017. Sejin Lee, "A New Style of Sonar Sensor Array for Extended Kalman Filter based Localization of Mobile Robots," Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 4, pp. 518-524, Aug 2017. Donghyun Kim, Yesenia Velasco, Wei Wang, R. Uma, Rasheed Hussain, and Sejin Lee, "A New Comprehensive RSU Installation Strategy for Cost-Efficient VANET Deployment," IEEE Transactions on Vehicular Technology, Vol. 66, No. 5, pp. 4200-4211, May 2017. Eon-ho Lee and Sejin Lee, "Development of Underwater Terrain Map Building Method on Polar Coordinates by Using 3D Sonar Point Clouds," International Journal of Applied Engineering Research, Vol. 11, No. 14, pp. 8259-8264, Aug 2016. Sejin Lee and Donghyun Kim, "Spherical Signature Description of 3D Point Cloud and Environmental Feature Learning based on Deep Belief Nets for Urban Structure Classification," Journal of Korea Robotics Society, Vol. 11, No. 3, pp. 115-126, Sept 2016. Sejin Lee and Nam Hoon Kim, "A Development of Inspection System for Concentricity of Hole-Saw through Image Analysis," Journal of the Korean Society of Mechanical Technology, Vol. 18, No. 3, pp. 432-438, Jun. 2016. Woo-Tae Kim, Sun-gyo Seo, and Sejin Lee, "Taguchi method for optimization of design parameters based on the outlet pressure uniformity of the plasma discharge chamber," Journal of the Korean Society of Mechanical Technology, Vol. 18, No. 1, pp. 11-17, Feb 2016. Sejin Lee, Donghyun Kim, and Alade O. Tokuta, "Development of Advanced Sonar Sensor Model for Underwater Terrain Mapping based on Occupancy Grids," International Journal of Applied Engineering Research, Vol. 10, No. 17, pp. 38045-38050, Sept 2015. Sejin Lee, Nam-Hun Kim, "Extended Kalman Filter based Localization with Sonar Features extracted by Grid Association for Mobile Robots," International Journal of Applied Engineering Research, Vol. 10, No. 7, pp. 17137-17148, May 2015. Joon Hyun Kim and Sejin Lee, "Configuration of Noncontact Grip System for Carrying Large Flat Sheets Using Vacuum Air Heads," Journal of Tribology, Vol. 137, No. 4, pp. 041103(1)-041103(8), Jul 2015. Yun-Kyu Choi and Sejin Lee, "Development of Advanced Sonar Sensor Model using Data Reliability and Map Evaluation Method for Grid Map Building," Journal of Mechanical Science and Technology, Vol. 29, No. 2, pp. 485-491, Feb 2015. Joon Hyun Kim, Sung Wook Ahn, and Sejin Lee, "Non-Contact Pick-up System for Turning Large Flexible Thin Sheets," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 23, No. 5, pp. 435-442, Oct 2014. Woo-Tae Kim and Sejin Lee, "Optimization of Design Parameters for Steel Grating Using Taguchi Method Considering Rigidity and Drainage Efficiency," Transactions of the Korean Society of Mechanical Engineers A, Vol. 38, No. 8, pp. 905-910, Aug 2014. Sejin Lee and Kyoungmin Lee, "Development of Web-camera Image Processing-based Natural Landmark Extraction Method for Automatic Welding Using 3-axis Stage," Journal of the Korean Society of Mechanical Technology, Vol. 15, No. 6, pp. 853-860, Dec 2013. Kyoungmin Lee, Sejin Lee, Mathias Kolsch, and Wan Kyun Chung, "Enhanced Maximum Likelihood Grid Map with Reprocessing Incorrect Sonar Measurements," Autonomous Robots, Vol. 35, No. 2-3, pp. 123-141, Oct 2013. Byungjae Park, Sejin Lee, Wan Kyun Chung, and Dong-Woo Cho, "Development of Grid Observation Model for Particle Filter-based Mobile Robot Localization using Sonar Grid Map," Journal of the Korean Society for Precision Engineering, Vol. 30, No. 3, pp. 308-316, Mar. 2013. Sejin Lee and Kyoungmin Lee, "Development of Accurate Correction Method of Bearing Position Error of Mobile Robots Using Stargazer Sensor," Journal of the Korean Society of Mechanical Technology, Vol. 14, No. 5, pp. 43-49, Oct. 2012. Sejin Lee and Kyoungmin Lee, "Effective Application of SP model Using Sonar Data for SLAM of Mobile Robots," Journal of the Korean Society of Mechanical Technology, Vol. 14, No. 1, pp. 45-52, Feb. 2012. Sejin Lee, Dong-Woo Cho, and Jae-Bok Song, "Novel Sonar Salient Feature Structure for Extended Kalman Filter-Based Simultaneous Localization and Mapping of Mobile Robots," Advanced Robotics, Vol. 26, No. 8-9, pp. 1055-1074, May 2012. Young-Jin Heo, Jong-Hwan Lim, and Sejin Lee, "EKF-based SLAM Using Sonar Salient Feature and Line Feature for Mobile Robots," Journal of the Korean Society for Precision Engineering, Vol. 28, No. 10, pp. 1174-1180, Oct. 2011. Joong-Tae Park, Jae-Bok Song, Sejin Lee, and Munsang Kim, "Sonar Sensor-Based Efficient Exploration Method Using Sonar Salient Features and Several Gains," Journal of Intelligent Robotic Systems, Vol. 63, No. 3-4, pp. 465-480, Sept. 2011. Sejin Lee, Jong-Hwan Lim, and Dong-Woo Cho, "A Complete Feature Map Building Method of Sonar Sensors for Mobile Robots," Journal of the Korean Society for Precision Engineering, Vol. 27, No. 1, pp. 64-75, Jan. 2010. Sejin Lee, Byung-Jae Park, Jong-Hwan Lim, and Dong-Woo Cho, "Feature Map Management for Mobile Robots in Dynamic Environments," Robotica, Vol. 28, No. 1, pp. 97-106, 2010. Sejin Lee, Dong-Woo Cho, and Jong-Hwan Lim, "Effective Localization of Mobile Robots Using a Sonar Sensor Ring," International Journal of Robotics and Automation, Vol. 25, No. 3, pp. 186-194, 2010. Sejin Lee, Jong-Hwan Lim, and Dong-Woo Cho, "General Feature Extraction for Mapping and Localization of a Mobile Robot Using Sparsely Sampled Sonar Data," Advanced Robotics, Vol. 23, No. 12-13, pp. 1601-1616, Sept. 2009. Sejin Lee, Jong-Hwan Lim, and Dong-Woo Cho, "Development of Robust Feature Detector Using Sonar Data," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 2, pp. 35-42, Feb. 2008. Sejin Lee, Byung-Jae Park, Jong-Hwan Lim, Wan-Kyun Chung, and Dong-Woo Cho, "Grid Map Building through Neighborhood Recognition Factor of Sonar Data," The Journal of Korea Robotics Society, Vol. 2, No. 3, pp. 227-233, Sept. 2007. Sejin Lee, Jong-Hwan Lim, and Dong-Woo Cho, "Feature-based Map Building Using Sparse Sonar Data in a Home-like Environment," Journal of Mechanical Science and Technology, Vol. 21, No. 1, pp. 74-82, Jan. 2007. 경력 경일대학교 로봇응용학과 조교수 (2011.03 ~ 2013.08) 서울과학기술대학교 기계공학과 기금조교수 (2010.03 ~ 2011.02) 고려대학교 지능로봇연구센터 연구교수 (2009.08 ~ 2010.02) 학술활동 학회활동 한국로봇학회 정회원, 학술대회 조직위 대한기계학회 정회원, 총무이사, IT융합부문 총무이사 학술이사 제어로봇시스템학회 정회원, 스마트모바일로봇 연구회장 한국기계기술학회 정회원, 편집이사 대한기계학회 인공지능머신연구회, 운영이사 연구수행과제 Current Projects 해양레저선박 표준 제작기술 및 수중레저활동 안전지원 로봇 개발, 한국로봇융합연구원, 2022-01-01 ~ 2025-12-31 소나 데이터 기반의 실시간 수중 지형지도 정합 SW 통합기술 개발, 선박해양플랜트연구소, 2024-01-01 ~ 2024-11-30 무인수상정 수중 장애물 탐지 체계 개발, 한국해양과학기술원, 2020-03-24 ~ 2020-07-31 도시 환경의 장기적 자율주행을 위한 라이다(LiDAR) 데이터의 의미지도 작성, 한국연구재단, 2019-06-01 ~ 2022-02-28 3차원 점군 데이터를 이용한 공간인지 기술 연구, 한국전자통신연구원, 2018-03-01 ~ 2020-11-30 라이다 데이터의 딥러닝 기반 물체 자동 탐지 기술 개발, 선박해양플랜트연구소, 2020-04-01 ~ 2024-11-10 매니퓰레이터 자세 안정화 기술 개발, 공주대학교, 2020-03-01 ~ 2021-02-15 실시간 소나스캔정보 기반의 수중 전역지형도 작성 기술 개발, 2022-01-01 ~ 2022-11-30 이동경 교수 연구실 1공학관708호 전화번호 041-521-9260 전공 레이저가공 이메일 ldkkinka@kongju.ac.kr 상세보기 홈페이지 바로가기 학력 2008 - 2012, Ph.D. in Mechanical Engineering, University of Michigan, Ann Arbor, MI, U.S.A. (Advisor : Jyotirmoy Mazumder) 2006 - 2011, M.S. in Aerospace Engineering, University of Michigan, Ann Arbor, MI, U.S.A. 2006 - 2007, M.S. in Mechanical Engineering, University of Michigan, Ann Arbor, MI, U.S.A. 2002 - 2006, B.S. in Mechanical Engineering (Summa Cum Laude), Hanyang University, Seoul, Korea 논문 발표논문 Lanh Ngoc Trinh, Dongkyoung Lee*, "A study on laser welding for dissimilar metals of aluminum and copper using pulsed fiber laser", International Journal of Precision Engineering and Manufacturing, 2024, SCI(E) Jaegeun Shin, Juhee Yang, Dongkyoung Lee*, "Comparison of Laser Processability for LiFePo4 Cathode Material with Nanosecond and Femtosecond Laser", Journal of Science: Advanced Materials and Devices, 2024, SCI(E) Mulugeta Gebrekiros Berhe, Dawit Musse Yasin, Hong Geun Oh, Seung-Keun Park, Dongkyoung Lee*, "Development of Laser Structured Three-dimensional Patterns for Improved Wettability and Performance of Electrodes for Lithium-Ion Batteries", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, SCI(E) Dawit Musse Yasin, Dongkyoung Lee*, "Computational Evaluation of PEMFC Performance Based on Bipolar Plate Material Types", Energy Reports, 2024, SCI(E) Lanh Ngoc Trinh, Dongkyoung Lee*, "Effect of welding path on the weld quality of aluminum tab and steel battery case in lithium-ion battery", Journal of Mechanical Science and Technology, 2024, SCI(E) Tam Van Huynh, Dongkyoung Lee*, "Changes of Microstructural Characteristics of Cement-based Material in Scabbling Process Using Nanosecond Pulsed Laser", Journal of Building Engineering, 2023, SCI(E) Mounarik Mondal, Joonghan Shin, Dongkyoung Lee*, "Effect of Bottom Sheet Thickness on Weld properties during Laser Lap Welding of Aluminum and Copper",The International Journal of Advanced Manufacturing Technology, 2023, SCI(E) Mulugeta Gebrekiros Berhe, Hong Geun Oh, Seung-Keun Park, Mounarik Mondal, Dongkyoung Lee*, "Effect of laser-induced groove morphology on the wettability and performance of Lithium-ion batteries", Materials & Design, 2023, SCI(E) Tam Van Huynh, Dongkyoung Lee*, "The effect of incidence angle on the interaction of a pulse laser with ultra-high-performance concrete in the scabbling process", Journal of Building Engineering, 2023, SCI(E) Sungwoo Park+, Mang Muan Lian+, Dongkyoung Lee*, Sukhoon Pyo*, "Chemical and Physical Characteristics of Hybrid Alkaline Cement Composite after Laser Interaction", Journal of Building Engineering, 2023, SCI(E) Dawit Musse, Dongkyoung Lee*, "Parametric study of pulsed nanosecond laser interaction with carbon-nanotube composite bipolar plate for PEMFCs", Scientific Reports, 2023, SCI(E) Youngjin Seo, Lanh Ngoc Trinh, Dongkyoung Lee*, "The influence of the proportion of silica sand on cement mortar during laser irradiation", Materials Chemistry and Physics, 2023, SCI(E) Tam Van Huynh, Mounarik Mondal, Dongkyoung Lee*, "An experimental investigation of laser scabbling on cement-based materials using nanosecond fiber laser", Scientific Reports, 2022 Youngjin Seo, Seungik Son, Dongkyoung Lee*, "A study of laser cleaning to remove by-products occurring after arc welding", Materials Chemistry and Physics, 2022 Suman Chatterjee, Lanh N. Trinh, Dongkyoung Lee*, "Mechanical and Microstructural Investigation of Dissimilar Joints of Al-Cu and Cu-Al Metals using Nanosecond Laser", Journal of Mechanical Science and Technology, 2022 Youngjin Seo, Dongkyoung Lee*, Sukhoon Pyo*, "The interaction of High-Power Fiber Laser Irradiation with Intrusive Rocks", Scientific Reports, 2022 Mulugeta Gebrekiros Berhe, Hong Geun Oh, Seung-Keun Park, Dongkyoung Lee*, Laser cutting of silicon anode for lithium-ion batteries, Journal of Materials Research and Technology, 2021 Tam Van Huynh, Youngjin Seo, Dongkyoung Lee*, The effect of silica sand proportion in laser scabbling process on cement mortar, Metals, 2021 Youngjin Seo, Jungsoo Nam, Huitaek Yun, Martin Byung Guk Jun, Dongkyoung Lee*, Effect of Au-coating on the laser spot cutting on spring contact probe (SCP) for semi-conductor inspection, Materials, 2021 Mang Muan Lian, Youngjin Seo, Dongkyoung Lee*, An Experimental Investigation on the Cutting Quality of Three Different Rock Specimens using High Power Multimode Fiber Laser, Materials, 2021 Mulugeta Gebrios Berhe, Dongkyoung Lee*, A comparative study on the wettability of unstructured and structured LiFePO4 with nanosecond pulsed fiber laser, Micromachines, 2021 Dongkyu Park, Dongkyoung Lee*, "Effect of fluence and multi-pass on groove morphology and process efficiency of laser structuring for 3D electrodes of lithium-ion batteries", Materials, 2021 Dongkyu Park, Dongkyoung Lee*, "The effect of electrode thickness on edge quality in laser cutting", Journal of Korean Society of Precision Engineering, 2021 Seungik Son, Dongkyoung Lee*, "The effect of laser parameters on cutting metallic materials", Materials, 2020 Lanh Ngoc Trinh, Dongkyoung Lee*, "The effect of using the metal tube on laser welding of the battery case and the tab for lithium-ion battery", Materials, 2020 Dongkyu Park, Dongkyoung Lee*, "Experimental study of electrode structuring using nanosecond laser for enhanced battery performance", Journal of Welding and Joining, 2020 Lanh Ngoc Trinh, Dongkyoung Lee*, "The characteristics of laser welding of a thin aluminum tab and steel battery case for lithium-ion battery", Metals, 2020 Lanh Ngoc Trinh, Dongkyoung Lee*, "Welding of thin tab and battery case for lithium-ion battery cylindrical cell using nanosecond pulsed fiber laser", Journal of Welding and Joining, 2020 Seungik Son, Dongkyoung Lee*, "Study on the interaction characteristics of Acrylonitrile Butadiene Styrene and UV laser", Archives of Civil and Mechanical Engineering, 2020 Dongkyoung Lee*, Youngjin Seo, Sukhoon Pyo, "Introduction to Concrete Laser Processing Technology for the Application of Nuclear Power Plant Demolition", The Magazine of the Korean Society of Civil Engineering, 2020 Dongkyoung Lee*, Dongkyu Park, "레이저 가공기술을 적용한 리튬이온 배터리 생산공정", The Korean Welding and Joining Society New letter, 2020 Youngjin Seo, Sukhoon Pyo, Dongkyoung Lee*, "Experimental study of multimode fiber laser cutting on cementitious composites", Transactions of the Korea Society of Mechanical Engineers A, 2020 Dongkyoung Lee*, Jungdon Suk*, "Laser Cutting Characteristics on Uncompressed Anode for Lithium-Ion Batteries", Energies, 2020Youngjin Seo, Dongkyoung Lee*, Sukhoon Pyo*, "High-Power Fiber Laser Cutting for 50-mm-Thick Cement-Based Materials", Materials, 2020 Youngjin Seo, Dongkyoung Lee*, Sukhoon Pyo*, "Microstructural characteristics of cement-based materials fabricated using multi-mode fiber laser", Materials, 2020 Dongkyoung Lee*, Shiva Pathak, Jee-Heon Jeong*, "Design and manufacture of 3D cell culture plate for mass production of cell-spheroids", Scientific Reports, 2019 Dongkyoung Lee, Byungmoon Oh, Jungdon Suk*, "Effect of compactness on laser cutting of cathode for lithium-ion batteries using CW fiber laser", Applied Sciences, 2019 Youngjin Seo, Sukhoon Pyo, Dongkyoung Lee*, "Experimental investigation of laser cutting on cement composites", Journal of Welding and Joining, 2019 Seungik Son, Dongkyoung Lee*, "Experimental Investigation of Infrared laser drilling process applied with different repetition rate on Ni-Au coated BeCu", Journal of Welding and Joining, 2019 Dongkyoung Lee*, "Understanding of BeCu interaction characteristics with a variation of ns laser-pulse duration", Materials, 2018 Dongkyoung Lee, Youngjin Seo, Sukhoon Pyo*, “Effect of laser speed on cutting characteristics of cement-based materials", Materials, 2018 Dongkyoung Lee*, "Experimental Investigation of Laser Ablation Characteristics on Nickel-Coated Beryllium Copper", Metals, 2018 Dongkyoung Lee*, "Investigation of physical phenomena and cutting efficiency for laser cutting on anode for lithium-ion batteries", Applied Sciences, 2018 Dongkyoung Lee, Sukhoon Pyo*, "Experimental Investigation of Multi-Mode Fiber Laser Cutting on Cement Mortar", Materials, 2018 Dongkyoung Lee*, Jyotirmoy Mazumder, “Effects of Momentum Transfer on Sizing of Current Collectors for Lithium-ion Batteries during Laser Cutting", Optics and Laser Technology, 2018 Dongkyoung Lee, Dahoon Ahn*, "Dataset of testbed and preliminary data for de-icing experiments using piezoelectric actuators", Data in Brief, 2018 Dongkyoung Lee, "Dataset demonstrating effects of momentum transfer on sizing of current collector for lithium-ion batteries during laser cutting", Data in Brief, 2018 Dongkyoung Lee, “Investigation of Laser Ablation on Acrylonitrile Butadiene Styrene Plastic Used for 3D Printing", Journal of Welding and Joining, 2018 Dongkyoung Lee*, “Picosecond IR Pulsed Laser Drilling of Copper Coated Glass/Epoxy Composite”, IEEE Transactions on Components, Packaging and Manufacturing Technology, 2017 Dongkyoung Lee*, Jungdon Cho, Chan Ho Kim, Seung Hwan Lee, "Application of Laser Spot Cutting on Spring Contact Probe for Semiconductor Package Inspection”, Optics and Laser Technology, 2017 Dongkyoung Lee, “Experimental investigation of laser spot welding of Ni and Au-Sn-Ni alloy", Journal of Welding and Joining, 2017 Dongkyoung Lee, Sukhoon Pyo*, "시멘트기반 복합재료의 레이저 절단기술", Laser Solutions, 2017 Dongkyoung Lee*, Rahul Patwa, Hans Herfurth, Joyti Mazumder, “Three dimensional simulation of high speed remote laser cutting of cathode for lithium-ion batteries”, Journal of Laser Applications, 2016 Dongkyoung Lee*, Joyti Mazumder, “Effects of laser beam spatial distribution on laser-material interaction", Journal of Laser Applications, 2016 Dongkyoung Lee*, Rahul Patwa, Hans Herfurth, Joyti Mazumder, “Parameter optimization for high speed remote laser cutting of electrodes for lithium-ion batteries", Journal of Laser Applications, 2016 특허 등록 및 출원(최근 5년) Dongkyoung Lee, Chanhee Jeong, "Smart laser drilling device; 휴대용 레이저 드릴기", 10-2023-0174639, Korea, 2023.12.05 Dongkyoung Lee, Seungeun Baek, "Method for manufacturing graphite separator using laser processing; 레이저 가공을 이용한 흑연 분리판 제조방법", 10-2023-0173389, Korea, 2023.12.04 Dongkyoung Lee, Seungeun Baek, "Dust and particle removal device for laser processing; 레이저 가공용 분진 및 파티클 제거장치", 10-2023-0173388, Korea, 2023.12.04 Dongkyoung Lee, Youngjin Seo, "Specimen workbench with heat bending prevention function; 열굽힘 방지 시편 작업대", 10-2023-0169041, Korea, 2023.11.29 Dongkyoung Lee, Youngjin Seo, Hoseong Kong, "Wire brushing system; 와이어 브러싱 시스템", 10-2023-0111592, Korea, 2023.08.24 Dongkyoung Lee, Youngjin Seo, "Welding slag removal system using laser; 레이저를 이용한 용접부 슬래그 제거 시스템", 10-2573963, Korea, 2023.08.30 Dongkyoung Lee, Youngjin Seo, Dongok Yu, "Welding slag removal method using laser; 레이저를 이용한 용접부 슬래그 제거 방법", 10-2562859, Korea, 2023.07.30 Dongkyoung Lee, Youngjin Seo, Sukhoon Pyo, "Operation method of high power fiber laser irradiation system; 고출력 광섬유 레이저 조사시스템 운용방법", 10-2023-0016045, Korea, 2023.02.07 Dongkyoung Lee, Youngjin Seo, Seungik Son, "Device for removing by-products of Arc welding; 아크 용접 부산물 제거장치", 10-2023-0016044, Korea, 2023.02.07 Dongkyoung Lee, Dongkyu Park, Jaegeun Shin "Lithium-ion battery electrode manufacturing method; 리튬 이온 배터리 전극 제조 방법", 10-2023-0016043, Korea, 2023.02.07 Dongkyoung Lee, Tam Vanh Hyunh, Mounarik Mondal, "Laser Scrabble irradiation apparatus of Cement-based Materials Using Nanosecond Fiber Laser; 나노초섬유 레이저를 이용한 시멘트계 재료의 레이저 스크 래블화 조사 장치", 10-2023-0016042, Korea, 2023.02.07 Dongkyoung Lee, Youngjin Seo, "A method of measuring the effect of silica sand ratio in the laser scraping process on cement mortar;시멘트몰탈에 대한 레이저 스크래빙 과정에서 실리카샌드 비율의 효과를 측정하는방법", 10-2023-0016041, Korea, 2023.02.07 Dongkyoung Lee, ”Nozzle device for gas discharge of molten resin; 응용수지의 가스 배출을 위한 노즐장치”,10-2023-0002228, Korea, 2023.01.06 Dongkyoung Lee, Seungik Son, ”The writing instrument capable of distance measurement; 거리 측정이 가능한 필기구”,10-2402695, Korea, 2022.05.23. Dongkyoung Lee, "Laser processing equipment for lithium metal battery using chamber; 챔버를 이용한 리튬금속전지의 레이저 가공장치", 10-2346497(PCT/KR2020/011542), Korea, 2021.12.28 Dongkyoung Lee, Trinh Ngoc Lanh, "Specimen marker with reflective surface and clip formed and tensile test system using that 반사면 및 클립이 형성된 시편마커 및 이를 이용한 인장시험 시스템", 10-2333436, Korea, 2021.11.26 Dongkyoung Lee, Seungik Son, ”Metal plate machining method; 금속판 가공방법”,10-2021-0127324, Korea, 2021.09.27 Dongkyoung Lee, Seungik Son, ”Metal plate machining method; 금속판 가공방법”,10-2021-0127319, Korea, 2021.09.27 Dongkyoung Lee, Youngjin Seo, Dongok Yu, "Welding slag removal method using laser; 레이저를 이용한 용접부 슬래그 제거 방법", 10-2021-0122028, Korea, 2021.09.13 Dongkyoung Lee, Youngjin Seo, "Welding slag removal system using laser; 레이저를 이용한 용접부 슬래그 제거 시스템", 10-2021-0121281, Korea, 2021.09.10 Joonghan Shin, Dongkyoung Lee, "Method for manufacturing of honeycomb structure using plastic film; 플라스틱 필름을 이용한 허니컴 구조체 제조방법”,10-2224330, Korea, 2021.03.02 Dongkyoung Lee, Seungik Son, ”The writing instrument capable of distance measurement; 거리 측정이 가능한 필기구”,10-2021-0020163, Korea, 2021.02.15 AWARDS and OTHERS(최근 5년) Excellent Paper Award 최우수논문상, "Experimental study on interaction characteristics and channel fabrication using nanosecond laser on carbon nanotube composites", KSPE Fall Conference, Samcheok, Korea, 2023.11.17 Excellent Paper Award 최우수논문상, "Effect of Nanosecond Laser Cleaning on Surface Morphology and Properties around Weld Bead", KSPE Fall Conference, Samcheok, Korea, 2023.11.17 Excellent Paper Award 최우수논문상, "A Theoretical Study on the Effect of Bipolar Plate Materials on the Performance of PEMFCs", KSPE Fall Conference, Samcheok, Korea, 2023.11.17 Minister's Award for SMEs and Startups 중소기업벤처부 장관상, Technology Cooperation (Industry-Academia-Research) category, SME Technology and Management Innovation Fair, BEXCO, Korea, 2023.10.18 Excellent Paper Presentation Award 우수논문발표상, "The effect of incidence angle of a pulse laser in laser scabbling process of ultra-high performance concrete", KSLP Spring Conference, Gyeongju, Korea, 2022.11.24 KNU Excellent Researcher Award 우수연구자상, Industry-University Cooperation Foundation, Kongju National University, 2022.06. Excellent Poster Award 최우수포스터상, "Experimental Study on Laser Interaction with CNT Composites Using Pulsed Nanosecond Laser", KSLP Spring Conference, Yeosu, Korea, 2022.05.27 KNU Excellent Researcher Award 우수연구자상, Industry-University Cooperation Foundation, Kongju National University, 2021.09.07 Excellent Paper Award 우수논문상, "Effect of welding path on the weld quality of aluminum tab and steel battery case in lithium-ion battery ", KSLP Spring Conference, Online, Korea, 2021.06.04 Excellent Poster Award 우수포스터상, "Nanosecond Laser Structuring of Electrodes for Improving Power Density of Lithium-ion Batteries ", KSLP Spring Conference, Online, Korea, 2021.06.04 Excellent Poster Award 우수포스터상, "Influence of Nanosecond Laser Joining on the Physical and Chemical Properties of Polypropylene", KSLP Spring Conference, Online, Korea, 2021.06.04 Excellent Paper Presentation Award 우수논문발표상, "A Study on Removal of Defects Formed around Weld Bead Using Laser Cleaning.", KWJS Spring Conference, Changwon, Korea, 2021.06.15 Excellent Poster Award 우수포스터상, "생분해성 폴리머 PLA를 이용한 레이저 접합 연구", KSLP Spring/Fall Conference, Online, Korea, 2020.11.20 경력 2024 - present, 1st General Manager 연구제1부처장, Office of Research Affairs 연구처, Kongju National University 2024 - present, Head of Research Innovation Center 연구혁신센터장, Office of Research Affairs 연구처, Kongju National University 2024 - present, Deputy General Manager of Research Support Division 연구지원부단장, Industry-University Cooperation Foundation 산학협력단, Kongju National University 2022-present, Research Director 연구소장, Global Institute of Manufacturing Technology (GITECH), Kongju National University 2021 - present, Associate Professor(Tenured), Dept. of Mech. and Auto. Engineering, Kongju National University 2020 - present, Associate Professor, Dept. of Mech. and Auto. Engineering, Kongju National University 2020 - present, Associate Professor, Dept. of Mech. and Auto. Engineering, Kongju National University 2016 - 2020, Assistant Professor, Dept. of Mech. and Auto. Engineering, Kongju National University 학술활동 Organizing Committee, KSCM Spring Conference, 2021 Organizing Committee, KSLP Spring/Fall Conference, 2019~present Member(Executive) of Korean Society for Laser Processing, 2012(2017) - present Member(Executive) of Korean Society for Precision Engineering, 2016(2017) - present Member(Executive) of Korean Society for Composite Materials, 2018(2019) - present Member(Executive) of Korean Welding and Joining Society, 2019(2020) - present Member of Korean-American Scientists and Engineers Association, 2011 - present Member of Laser Institute of America, 2009 - present 연구수행과제 Support Program for Specialized University of Semiconductor 반도체 특성화대학 지원사업, 교육부, 2024.03.01~2028.02.28 Material and Design Optimization of CNT-composite for Eco-friendly Power System 친환경동력시스템을위한 CNT 복합체의 소재-구조 최적 설계, 교육부, 2024.07.01~2025.02.28 Innovative Human Resources Program for Technology Convergence of Eco-friendly Automobile 친환경 자동차 기술융합 혁신인력양성, 산업부, 2024.03.01~2025.02.28 Development of structured electrodes to improve secondary battery performance 2차전지 성능 향상을 위한 구조화 전극 개발, 교육부, 2024.06.01~2025.02.28 Global Human Resources Program for Core Technology of Future Mobility 미래모빌리티 핵심기술을 위한 글로벌 인재양성, 산업부, 2024.03.01~2027.02.28 Software Forefront University 소프트웨어중심대학, 과기부, 2024.05.01~2031.12.31 Distributed energy response regional specialization future energy talent training; 분산에너지 대응 지역 특화 미래에너지 인재양성, 산업부 2024.05.01~2029.12.31 Development of an eco-friendly nozzle system for plastic equipped with a gas vent system to reduce molding defects; 성형 불량 감소를 위해 가스벤트 시스템이 탑재된플라스틱용 친환경노즐 시스템 개발, 연구재단, 교육부, 2024.04.01~2024.11.30 Fundamental study on the effect of laser processing in the controlled external environment for secondary battery performance 외부환경이 제어된 레이저가공 공정이 2차전지 성능 미치는 기초연구, 중견연구, 과기부, 2023.03.03~2027.02.28 Advanced Powder Material & Parts Research Infrastructure Development, 첨단분말소재부품개발기반구축, 산업부, 2021.05.01~2025.12.31 Graduate Program for Eco-Friendly Future Automotive Technology 친환경 미래자동차 소재 부품 공정 창의 인재 양성 사업단, BK21Plus, 연구재단, 과기부 2020.09.01~2026.12.31 윤정훈 교수 연구실 1공학관706호 전화번호 041-521-9255 전공 기능성 고분자 복합재 이메일 jhyun83@kongju.ac.kr 상세보기 학력 서울대학교, 박사 (Ph. D, Seoul National Univ. 2012.09 ~ 2016.08) 서울대학교, 석사 (MS, Seoul National Univ. 2010.03 ~ 2012.02) 서울대학교, 학사 (BS, Seoul National Univ. 2002.03 ~ 2009.08) 논문 Jung-Hoon Yun, Chenzhe Li, Seongseop Kim, and Maenghyo Cho, Comparing Photoactuation of an Azobenzene-Doped Nematic Liquid Crystal Polymer through Its Activation Mechanism: Trans·Cis·Trans Reorientation and Photoisomerization, J. Phys. Chem C 2018, 122, 6310-6317. (2018.02) Chenzhe Li, Junghwan Moon, Jung-Hoon Yun, Hyunsu Kim, and Maenghyo Cho, Influence of external loads on structure and photoactuation in densely crosslinked azo-incorporated liquid crystalline polymers, 2017, 129, 252-260. (2017.09) Jung-Hoon Yun, Chenzhe Li, Hayoung Chung, Joonmyung Choi, and Maenghyo Cho, Multiscale modeling and its validation of the trans-cis-trans reorientation-based photodeformation in azobenzene-doped liquid crystal polymer, Int. J. Solid. Struct. 2017, 128, 36-49. (2017.08) Muyoung Kim, Jung-Hoon Yun, and Maenghyo Cho, Light penetration-coupled photoisomerization modeling for photodeformation of diarylethene single crystal: upscaling isomerization to macroscopic deformation, Sci. Report 2017, 7, 967 (2017.04) Finite-element analysis of the optical-texture-mediated photoresponse in a nematic strip, Comput Mech 2017, 59, 147-160. (2016.10) (Co-1st author) Chenzhe Li, Jung-Hoon Yun, Hyunsu Kim, and Maenghyo Cho, Light Propagation and Photoactuation in Densely Cross-Linked Azobenzene-Functionalized Liquid-Crystalline Polymers: Contribution of Host and Concerted Isomerism, Macromol 2016, 49, 6012-6020. (2016.08) Joonmyung Choi, Hayoung Chung, Jung-Hoon Yun, and Maenghyo Cho, Molecular Dynamics Study on the Photothermal Actuation of a Glassy Photoresponsive Polymer Reinforced with Gold Nanoparticles with Size Effect, ACS Appl. Mater. Interfaces 2016, 8, 24008-24024. (2016.08) HayoungChung, JoonmyungChoi, Jung-HoonYun and MaenghyoCho, Nonlinear photomechanics of nematic networks: upscaling microscopic behaviour to macroscopic deformation, Sci. Report 2016, 6, 20026. (2016.02) Jung-Hoon Yun, Chenzhe Li, Hayoung Chung, Joonmyung Choi, and Maenghyo Cho, Photo deformation in azobenzene liquid-crystal network: Multiscale model prediction and its validation, Polymer 2015, 75, 51-56. (2015.08) Light and thermal responses of liquid-crystal-network films: A finite element study, Phys. Rev. E 2015, 91, 042503. (2015.04) Predicting photoisomerization profile of the highly polymerized nematic azobenzene liquid crystal network: First principle calculation, Chem. Phys. Lett. 2015, 627, 20-25. (2015.03) Photo-isomerization effect of the azobenzene chain on the opto-mechanical behavior of nematic polymer: A molecular dynamics study, Appl. Phys. Lett. 2014, 105, 221906. (2014.12) 경력 LG 디스플레이, 책임 연구원 (2017.12 ~ 2019.08) 서울대 정밀기계설계공동연구소, Pos-doc (2016.09 ~ 2017.12) 학술활동 학회활동 기계학회 전산구조공학회 표재범 교수 연구실 1공학관 705호 전화번호 041-521-9263 전공 박막재료 및 생산기술 이메일 jbpyo@kongju.ac.kr 상세보기 홈페이지 바로가기 학력 한국과학기술원(KAIST), 기계공학 박사, 2020 한국과학기술원(KAIST), 기계공학 석사, 2016 서울과학기술대학교, 기계시스템디자인공학 학사, 2014 논문 J.-B. Pyo, S. Lee, and T.-S. Kim, “Intrinsic swelling behavior of free-standing nanoporous ionomer-bound carbon films”, Polymer Testing, 100, 107241, 2021. (Front Cover) K.-S. Lee+, J.-B. Pyo+, T.-S. Kim, and H.-S. Park, “Tubular Hygromechanical Polymeric Brake for Soft and Compact Wearable Robots”, ACS Applied Polymer Materials, 3, 6, 3206-3213, 2021. (+Equal Contribution) J.-B. Pyo, J.H. Kim, K. Kim and T.-S. Kim, “Electrical resistance change in thermally reconfigured nanoporous ionomer-bound carbon films”, Journal of Materials Chemistry A, 9, 22, 13019-13025, 2021. (Featured as a JMCA HOT Paper) J.H. Kim, J.-B. Pyo and T.-S. Kim, “Highly mobile levitating soft actuator driven by multistimuliresponses”, Advanced Materials Interfaces, 7, 21, 2001051, 2020. J.-B. Pyo, J.H. Kim, and T.-S. Kim, “Highly robust nanostructured carbon films by thermal reconfiguration of ionomer binding”, Journal of Materials Chemistry A, 8, 46, 24763-24773, 2020. S. Kang, J.-B. Pyo, and T.-S. Kim, “Layer-by-layer assembly of free-standing nanofilms by controlled rolling”, Langmuir, 34, 20, 5831-5836, 2018. S. Kang, J. Kim, J.-B. Pyo, J.H. Cho, and T.-S. Kim, “Design of magnetic force field for trajectory control of levitated diamagnetic graphite”, International Journal of Precision Engineering and Manufacturing-Green Technology, 5, 2, 341-347, 2018. T.-I. Lee, C. Kim, J.-B. Pyo, M.S. Kim, and T.-S. Kim, “Effect of anisotropic thermo-elastic properties of woven-fabric laminates on diagonal warpage of thin package substrates”, Composite Structures, 176, 973-981, 2017. J.-B. Pyo, T.-I. Lee, C. Kim, M.S. Kim, and T.-S. Kim, “Prediction of time-dependent swelling of flexible polymer substrates using hygro-mechanical finite element simulations”, Soft Matter, 12, 18, 4135-4141, 2016. 경력 삼성전자 TSP총괄 패키지공정개발팀, Staff Engineer(책임급) (2021-2022) 한국과학기술원(KAIST) 기계기술연구소, 박사후연구원 (2020-2021) The University of Texas Health Science at Houston, Dept. of Neurosurgery, Visiting Researcher (2016-2017) 연구수행과제 수소에너지 활성화를 위한 연료전지용 취성 전극의 기계적 내구성 향상, 한국연구재단, 2020-2021 조향 가능한 마이크로카테터 개발, KAIST-SMC(삼성서울병원) 공동연구과제, 2018-2019 다층 기판의 Warpage 예측 기술 개발 및 Distortion 메커니즘 연구, 삼성전기, 2014-2015 이동욱 교수 연구실 1공학관 707호 전화번호 041-521-9258 전공 차량동역학 및 제어, 자율주행제어 이메일 dwlee@kongju.ac.kr 상세보기 학력 한국과학기술원(KAIST) 기계공학과 박사 (2014.03 ~ 2018.08) 한국과학기술원(KAIST) 기계공학과 석사 (2012.03 ~ 2014.02) 한국과학기술원(KAIST) 기계공학과 학사 (2008.02 ~ 2012.03) 논문 Ali Afzalaghaeinaeini, Jaho Seo, Dongwook Lee and Hanmin Lee, "Design of Dust-Filtering Algorithms for LiDAR Sensors Using Intensity and Range Information in Off-Road Vehicles." Sensors, 22.11, 4051, 2022. Byeonggwan Jang, Dongwook Lee, Kyuwon Kim and Kyung-Soo Kim, “Road torque modeling for electric power steering systems.” International Journal of Automotive Technology, 23.3, 765~773, 2022. Mingeuk Kim, Seungjin Yoo, Dongwook Lee, and Geun-Ho Lee, “Local Path-Planning Simulation and Driving Test of Electric Unmanned Ground Vehicles for Cooperative Mission with Unmanned Aerial Vehicles.” Applied Sciences, 15.5, 2326, 2022. Dongwook Lee, Ji-Chul Kim, Mingeuk Kim, and Hanmin Lee, “Intelligent tire sensor-based real-time road surface classification using an artificial neural network." Sensors, 21.9, 3222, 2021. Dongwook Lee, Byeonggwan Jang, Minwoo Han, Kyung-Soo Kim. "A new controller design method for an electric power steering system based on a target steering torque feedback controller." Control Engineering Practice, 106, 104658, 2021. Dongwook Lee, and Chang-Wan Ha. "Optimization process for polynomial motion profiles to achieve fast movement with low vibration." IEEE Transactions on Control Systems Technology, 28.5, 1892-1901, 2020. Chang-Wan Ha, Dongwook Lee, Keun-Ho Rew, Kyung-Soo Kim, "An Impulse-time Perturbation Approach for a Symmetric Extra-insensitive Input Shaper," International Journal of Control, Automation and Systems, 16.3 , 1239-1246, 2018. Chang-Wan, Ha, and Dongwook Lee, "Analysis of Embedded Prefilters in Motion Profiles", IEEE Transactions on Industrial Electronics, 65.2, 1481-1489, 2018. Dongwook Lee, Kyung-Soo Kim, and Soohyun Kim, "Controller design of an electric power steering system", IEEE Transactions on Control Systems Technology, 26.2, 748-755, 2018. 경력 한국기계연구원(KIMM) 스마트산업기계연구실 선임연구원 (2018.10~2022.08) 연구수행과제 휠속 센서 기반 타이어 압력/하중 추정 기술 (한국타이어, 2021~2022) 육공분리합체형 도심환경 자율배송용 육상무인이동체개발 (과학기술정보통신부, 2020~2022) 다중 이동식 크레인 기반 협업형 자동운반 기술 개발 (국토교통부, 2020~2022) 활주로 제설장비의 무인화 기술 개발 (민군협력진흥원, 2019~2021)
기계자동차공학부