학부·대학원

응용열공학연구실

응용열공학연구실 WELCOME TO OUR LABORATORY 홈페이지 바로가기

연구실소개

응용열공학연구실(ADTEL)은 열공학을 기반으로 하는 동력기관용 엔진 설계, 에너지 변환 시스템 구성, 연료 분사 및 미립화 특성 파악, 대체연료의 연소 및 배기가스 저감 기술 개발 및 전기자동차용 열관리 시스템 설계 관련 분야의 선도적인 실험적, 해석적 연구를 수행하고 있습니다.

연구분야

  • 미래형 자동차의 동력시스템 연구
  • 디젤엔진의 연소 및 배출물 저감 특성 연구
  • 연료 분무 및 미립화 특성 향상 연구
  • 에너지변환시스템의 열역학적 해석
  • HEV, EV의 배터리 열관리시스템 해석 연구

보유장비

  • Workstation (Dell Precision T7610 CTO Base)
  • DELL T640 Server
  • He-Ne laser
  • High Speed Camera (Lab 110G)
  • CCD Camera (DCU224C)
  • CCD Cemera Lens (MVL series)
  • LED Light Source (K-LED-004)
  • Short Wavelength Filtering System (CCM1-BS-13/M)
  • Fiber Illuminator
  • Constant Volume Combustion Chamber
  • Droplet Combustion System
  • Ignition System
  • Igniter Control System
  • Power Supply (TPE-3010S)
  • Oscilloscope (DLM2022)
  • Bombe Regulator (1000-C-1s)
  • Syringe Pump (LSP01-1A)
  • Thermometers Infrared (CHY-314)
  • AC Clamp Meter (HIOKI 3280-10)

보유 프로그램

  • AVL FIRE Code (해석 모델링)
  • CHEMKIN-PRO (해석)
  • AFDEX-2014-SP0 (모델링)
  • MATLAB Ver 7.03 1EA(수치제어)

발표논문

국외 전문학술지 (SCI/SCIe Journal)
·  Young Chan Lim, Jun Woo Jung, Hyun Kyu Suh, Effect of advanced intake valve closing on the thermo-chemical characteristics of the homogeneous combustion in a DME fueled HCCI engine, Fuel (SCI Journal), 273, 2020
·  Se Hun Min, Hyun Kyu Suh, Junepyo Cha., Effect of Simulated-EGR (N2) on the Distribution characteristics of equivalence ratio and the formation of exhaust emissions in a CI engine under early injection conditions, Energy (SCI Journal), 193, 116850, 1-12, 2020
·  Young Chan Lim, Hyun Kyu Suh, Prediction of homogeneous combustion by modification of the fuel combustion mechanism in a DME fueled CI engine, Journal of Mechanical Science and Technology (SCI e Journal), 33, 6075-6084, 2019
·  Se Hun Min, Hyun Kyu Suh, Effect of Water Vapor Injection on the Distributions of Equivalence Ratio and the NO Emission Reduction in a CI Engine, Energies (SCI Journal), 12, 22, 1-15, 2019
·  Se Hun Min, Hyun Kyu Suh, Seongin Jo , Suhan Park., Effect of Cryogenic Intake Air Temperature on the In-cylinder Temperature and Formation of Exhaust Emissions in a CI Engine, Journal of Engineering for Gas Turbines and Power (SCI Journal), 141, 091022, 1-8, 2019
·  Hyun Kyu Suh, Analysis of thermal performance of an outer-rotor Surface-mounted permanent magnet (SPM) motor for electric vehicles, Journal of Mechanical Science and Technology (SCIe Journal), 30, 12, 5699-5706, 2016
·  Hyun Kyu Suh, Chang Sik Lee, A review on atomization and exhaust emissions of a biodiesel-fueled compression ignition engine, Renewable and Sustainable Energy Reviews (SCI Journal), 58, 1601-1620, 2016
·  Hyun Kyu Suh, Experiments and theoretical approaches on the burning behaviors of single n-heptane droplet, Journal of Mechanical Science and Technology (SCIe Journal), 29, 5, 2249-2257, 2015
·  Hyun Kyu Suh, Development of Wobble-Plate-Type Fuel Pump in Compression Ignition Engine Fueled With Dimethyl Ether, Journal of Energy Resources Technology (SCI Journal), 137, 3, 032208, 2014 Daniel L. Dietrich, Vedha Nayagam, Michael C. Hicks, Paul V. Ferkul, Frederick L. Dryer, Tanvir Farouk, Benjamin D. Shaw, Hyun Kyu Suh, Mun Y. Choi, Yu Cheng Liu, C. Thomas Avedisian, Forman A. Williams, Droplet Combustion Experiments Aboard the International Space Station, Microgravity Science and Technology (SCIe Journal), 26, 2, 65-76, 2014
·  Hyun Kyu Suh, Study on the twin-pilot-injection strategies for the reduction in the exhaust emissions in a low-compression-ratio engine, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (SCI Journal), 228, 3, 2041-2991, 2014
·  Hyun Kyu Suh, and Chang Sik Lee, Impact of Orifice Angle Configurations on the Droplet Atomization Enhancement of Diesel Fuel in a Group-Hole Nozzle, Engineering for gas turbine and power (SCI Journal), 133, 112802, 2011
·  Hyun Kyu Suh, Investigations of Multiple Injection Strategies for the Improvement of Combustion and Exhaust Emissions Characteristics in a Low Compression Ratio (CR) Engine, Applied Energy(SCI Journal), 88, 112, 5013-5019, 2011


국내 전문학술지(한국연구재단 등재지/등재후보지)
·  Se Hun Min, Hyun Kyu Suh, Effect of Diameter Increase on Stress Distribution of Lightweight Aluminum IMS for xEV, Journal of KSMT, Vol. 22, No. 1, pp. 159-165, 2020
·  Jin Choi, Hyun Kyu Suh, Effect of Cylinder Geometries on the Soot Reduction in a Compression Ignition Engine with Swirl Nozzle Injector, Transactions of KSME, Vol. 44, No. 2, pp. 143-150, 2020
·  Young Chan Lim, Jun Woo Jung, Hyun Kyu Suh, A Prediction on the Flammability Limits of Biodiesel Fuel in the High Temperature and Pressure Conditions, Journal of ILASS-Korea, Vol. 24, No. 4, pp. 157-162, 2019
·  Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Effect of Diameter of Shaft Part on the Load Distribution Characteristics in Tubular & Solid Shaft Yoke for Al-IMS, Journal of KSMT, Vol. 21, No. 4, pp. 709-714, 2019
·  Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, The Effect of Target Species Changing on the Mechanism Reduction in DRGEP Method, Journal of The Korean Society of Combustion, Vol. 24, No. 3, pp. 1-8, 2019
·  Se Hun Min, Junpyo Cha, Hyun Kyu Suh, The Effect of Simulated-EGR(N2 + CO2) Composition on the Distributions of Fuel Mass Fraction and Formation/Oxidation of Exhaust Emissions in a CI Engine, Transactions of KSME, Vol. 43, No. 12, pp. 839-846, 2019
·  Jin Choi, Hyun Kyu Suh, Effect of Swirl Flow in a Cylinder induced by the Swirl Nozzle Injector on the Performance of CI Engine, Transactions of KSME, Vol. 43, No. 9, pp. 621-629, 2019
·  Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, Biodiesel-Combustion Analysis through a Study on the Reduction of the Chemical-Reaction Mechanism, Transactions of KSME, Vol. 43, No. 6, pp. 423-431, 2019
·  Jin Choi, Hyun Kyu Suh, Spray Atomization and In-Cylinder Mixture Characteristic of the Swirl Nozzle, Transactions of KSME, Vol. 43, No. 6, pp. 407-414, 2019
·  Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Stress Distribution Characteristics of Al-IMS for Passenger Vehicle, Journal of KSMT, Vol. 21, No. 3, pp. 517-522, 2019
·  Seok Hoon Jeong, Hyun Kyu Suh, “Effect of Vortex Generator in Intake Pipe on the Moisture Concentration Distributions and Combustion Performance in a CI Engine,” Journal of ILASS-Korea, Vol. 23, No. 4, pp. 169-174, 2018
·  Se Hun Min, Jin Seup Yeom, Hyun Kyu Suh, A Study on the Indentation Process Improvement of Tubular Shaft Yoke and Splined Shaft in IMS Module, Journal of KSMT, Vol. 20, No. 1, pp. 127-133, 2018
·  Jin Seup Yeom, Hyun Kyu Suh, The Effect of Shaft Hole Length on the A-IMS Tubular Shaft Machining, Journal of KSMT, Vol. 20, No. 1, pp. 96-101, 2018
·  Se Hun Min, Hyun Kyu Suh, Improvement of Tubular Shaft Yoke Spline Machining in Both Side IMS Module, Journal of KSMT, Vol. 20, No. 6, pp. 924-928, 2018
·  Young Chan Lim, Hyun Kyu Suh, Seung Hyun Yoon, “Prediction of Biodiesel Homogeneous Combustion and Flammability Limits in Compression Ignition Condition,” Trans. Korean Soc. Mech. Eng. B, Vol. 42, No. 11, pp. 711-719, 2018
·  Seok Hoon Jeong, Hyun Kyu Suh, “Influence of Fin Characteristics on the Turbulent Flow in IHX for a Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 20, No. 4, pp. 413-419, 2018
·  Young Chan Lim, Jun Woo Chung, Hyun Kyu Suh, “A Study on the NOX Formation Characteristics and Detailed Chemical Reaction Pathways of Biodiesel in the Various Ambient Conditions” Journal of Korean Soc. Combustion, Vol. 23, No. 2, pp. 27-34, 2018
·  Se Hun Min, Hyun Kyu Suh, “Prediction of Diesel Fuel Spray Characteristics in Compression Ignition Engine Cylinder by Intake Humidification,” Journal of ILASS-Korea, Vol. 23, No. 1, pp. 30-35, 2018
·  Se Hun Min, Hyun Kyu Suh, “The Numerical Study on Prediction of Diesel Fuel Spray Evolution in a Different Types of Nozzle Geometry,” Journal of ILASS-Korea, Vol. 22, No. 4, pp. 169-174, 2017
·  Seok Hoon Jeong, Hyun Kyu Suh, “The Effect of K-ε Turbulence Model on the Performance Analysis of Battery Cooling Systems,” Journal of Korean Soc. of Mechanical Technology, Vol. 19, No. 4, pp. 513-517, 2017
·  Se Hun Min, Hyun Kyu Suh, The Effect of Sliding Cage Geometry on the A-IMS Module for Commercial Vehicle, Journal of KSMT, Vol. 19, No. 1, 2017
·  Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, An Improvement of Production Straightness of A-IMS Tubular Shaft on According to the Number of Die Bearing, Journal of KSMT, Vol. 19, No. 3, pp. 396-401, 2017
·  Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, A Study on Improvement of Spline Processing in A-IMS Tubular Shaft, Journal of KSMT, Vol. 19, No. 3, pp. 421-426, 2017
·  Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Characteristics of Alkane-based Single Fuel Droplet,” Journal of ILASS-Korea, Vol. 22, No. 2, pp. 80-86, 2017
·  Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Behavior of Octane Single Fuel Droplet Under the Constant Volume Combustion Conditions,” Trans. Korean Soc. Mech. Eng. B, Vol. 41, No. 6, pp. 389-395, 2017
·  Se Hun Min, Kyung Bum Park, Hyun Kyu Suh,. Optimal design of commercial A-IMS core components using multi-stage cold forging method, Journal of KSMT, Vol. 18, No. 2, pp. 268-274, 2016
·  Se Hun Min, Hyun Kyu Suh, Optimal Design of the A-IMS Core Components for Commercial Vehicle by the Effect of Upper Die Type, Journal of KSMT, Vol. 18, No. 2, pp. 294-300, 2016
·  Se Hun Min, Hyun Kyu Suh, The Effect of Torque Variation on the Stress Distributions Characteristics in A-IMS for Passenger Vehicle, Journal of KSMT, Vol 18, No. 6, pp. 949-954, 2016
·  Seok Hoon Jeong, Hyun Kyu Suh, “Predictions of the Cooling Performance on an Air-Cooled EV Battery System According to the Air Flow Passage Shape,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 12, pp. 801-807, 2016
·  Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Fuel Spray Targeting for the Improvement of HSDI Engine Performance,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 9, pp. 596-576, 2016
·  Young Chan Lim, Hyun Kyu Suh, “Effect of High Temperature and Pressure Conditions on the Combustion Characteristics of n-butanol and n-heptane Fuel,” Journal of ILASS-Korea, Vol. 21, No. 1, pp. 29-36, 2016
·  Young Chan Lim, Hyun Kyu Suh, “Prediction of Biodiesel Combustion, CO and NOX Emission Characteristics in Accordance with Equivalence Ratio” Journal of Korean Soc. Combustion, Vol. 21, No. 1, pp. 1-7, 2016
·  Min S. H. and Suh H. K., Design optimization of the asymmetry pinch yoke according to the slit length, Journal of KSMT, Vol. 18, No. 1, pp. 102-108, 2016
·  Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Effect of Nozzle Geometry on the Small CRDI Engine Performance,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 254-260, 2015
·  Young Chan Lim, Hyun Kyu Suh, “Effect of Initial Diameter on the Soot Generation of Toluene Fuel Droplet,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 261-267, 2015
·  Young Chan Lim, Hyun Kyu Suh, “Effect of mixing ratio of n-heptane fuel on the combustion characteristics of n-butanol fuel” Journal of Korean Soc. Combustion, Vol. 20, No. 3, pp. 1-6, 2015
·  Se Hun Min, Hyun Kyu Suh, “Effect of operating conditions on the combustion and emission characteristics in small HSDI CI engine,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 699-705, 2015
·  Young Chan Lim, Hyun Kyu Suh, “Effect of Ambient Conditions on the Soot Generation of Decane Fuel Droplet,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 1-5, 2014